Instructions / Assembly

Granite Round Fire Pit Installation Instructions
Step 2: Install first row of granite blocks (10 units).
Layout the blocks in a circle as shown with the inside
diameter (approximately 23”). Level the blocks from
front to back and side to side. Blocks may need to be
shifted slightly in order to get a tight fit between all the
blocks on the first course.
Step 3: Install second row of granite blocks (10 units).
Place the first block on top of the bottom block
staggering the intersection of two blocks on the row
below. Continue around the circle making slight
adjustments as needed so that the edge of the blocks fit
tightly in the circle. Remove one block at a time from the
second course and glue to the two blocks below using
quarter-sized dabs of concrete adhesive.
Step 4: Install the remaining 7 rows. Place the blocks in
the same manner as Step 2, each row staggering the joints
of the blocks below. After making any adjustments to each
row, remove one block at a time and glue to the two
blocks below using quarter-sized dabs of concrete
adhesive. Installation is complete – Enjoy!
Step 1: Level the pad. Level a 40” circular area of gravel
or rock on compacted soil.
Important Product Information
The granite blocks are natural aggregates so color variation is normal. Keep
the fire inside of the fire pit as the granite can become warm to the touch. For
more information contact us at www.naturalconcreteproducts.com.