Accessories
NEW
11-Blade Cutting Unit
• Designed for mowing on lower heights of cut
• Use on greens and tee boxes up to 3/8” (9.5 mm)
• Equipped with EdgeMax Microcut Bedknife
• Select front roller
Traction Units
Cutting Units & Reel Options
Roller Options
The Greensmaster® TriFlex® and eTriFlex™
Series riding greens mowers cut with the
precision of a walker. But, that’s not all.
These mowers are engineered for maximum
versatility and productivity. Easy attachment
changeability and a wide variety of accessories
makes the TriFlex your all-around workhorse
machine.
14-Blade Cutting Unit
• Use for extremely fine greens mowing
• Best for use at heights of cut under .125” (3.175 mm)
• Equipped with EdgeMax Microcut Bedknife
• Select front roller
5 or 8-Blade Heavy-Duty Reel
• More robust reel for mowing rough surfaces
• Used for heights of cut above 3/8” (9.5mm) on fairways
and other off-greens applications
8-Blade Cutting Unit
• Designed for mowing on higher heights of cut, such as
approaches, fairways or tee boxes
• Heights of cut above 3/8” (9.5 mm)
• Equipped with EdgeMax
TM
Microcut Bedknife
• Select front roller
Greensmaster TriFlex 3400/3420
• 24.8 HP (18.5 kW), liquid-cooled, diesel engine
• All-hydraulic reel circuit (3400)
• All-electric reel circuit (3420)
• Automatic clip control (3420)
• Tool-Free, Quick-Change cutting units for increased
productivity and reduced maintenance
Greensmaster eTriFlex 3370 – NEW
• Power: All-electric using eight, Lithium-Ion
Samsung® SDI batteries
• Energy Capacity: 10.77 kWh; 48V nominal
• All-electric traction, steering, lift & reel drive
• No hydraulics
Greensmaster eTriFlex 3360 – NEW
• Engine: 14.5 HP (10.8 kW) air-cooled, gasoline engine
• Generator: 48V 5400W air cooled brushless
permanent magnet motor
• All-electric traction, steering, lift & reel drive
Greensmaster TriFlex 3300/3320
• 21 HP (15.6 kW), air-cooled, gasoline engine
• All-hydraulic reel circuit (3300)
• All-electric reel circuit (3320)
• Automatic clip control (3320)
• Tool-Free, Quick-Change cutting units for increased
productivity and reduced maintenance
Greensmaster Riding Greensmowers
GREENSMASTER
®
TRIFLEX
®
/eTRIFLEX
™
SERIES
ACCESSORY GUIDE
©2019 The Toro Company. All rights reserved. Rev. 4/19
Accessories and specifications subject to change.
Please contact your Toro distributor for details.
Front Narrow Wiehle Roller (Set of 3)
• .2” (5 mm) groove spacing, aluminum, 2.5” (6.4 cm)
diameter
• Slightly more turf penetration than the full roller
• Use in normal greens mowing conditions
Front Wide Wiehle Roller (Set of 3)
• .93” (2.4 cm) groove spacing, aluminum
• For more penetration into turf
• Use for mowing higher heights of cut, e.g. fairways
and approaches, and areas which are infrequently cut,
allowing longer grass blades to stand up before cutting
Front Full Roller (Set of 3)
• Use on soft greens or high stress conditions to prevent
turf thinning on clean-up cut. Steel sleeve.
Solid Steel Roller Kit
(Set of 1 – Front & Rear)
• Use on puffy fairways to control bobbing marks
• Adds weight to stabilize cutting unit over rough surfaces
Greensmaster
TriFlex Series
Greensmaster
eTriFlex Series