Accessories

11-Blade Cutting Unit
• Designed for mowing on lower heights of cut
• Use on greens and tee boxes up to 3/8” (9.5 mm)
• Equipped with EdgeMax Microcut Bedknife
• Select front roller
Traction Units
Cutting Units & Reel Options
Roller Options
The Greensmaster® TriFlex® and eTriFlex™
Series riding greens mowers cut with the
precision of a walker. But, that’s not all.
These mowers are engineered for maximum
versatility and productivity. Easy attachment
changeability and a wide variety of accessories
makes the TriFlex your all-around workhorse
machines.
14-Blade Cutting Unit
• Use for extremely fine greens mowing
• Best for use at heights of cut under .125” (3.175 mm)
• Equipped with EdgeMax Microcut Bedknife
• Select front roller
5 or 8-Blade Heavy-Duty Reel
• More robust reel for mowing rough surfaces
• Used for heights of cut above 3/8” (9.5mm) on fairways
and other off-greens applications
8-Blade Cutting Unit
• Designed for mowing on higher heights of cut, such as
approaches, fairways or tee boxes
• Heights of cut above 3/8” (9.5 mm)
• Equipped with EdgeMax
TM
Microcut Bedknife
• Select front roller
Greensmaster TriFlex 3400/3420
• 24.8 HP (18.5 kW), liquid-cooled, diesel engine
• All-hydraulic reel circuit (3400)
• All-electric reel circuit (3420)
• Automatic clip control (3420)
• Tool-Free, Quick-Change cutting units for increased
productivity and reduced maintenance
Greensmaster eTriFlex 3370
• Power: All-electric unit powered by advaced
Lithium-Ion batteries
• Energy Capacity: 10.77 kWh; 48V nominal
• All-electric traction, steering, lift & reel drive with
no hydraulics
• Tool-Free, Quick-Change cutting units for increased
productivity and reduced maintenance
Greensmaster eTriFlex 3360
• Engine: 14.5 HP (10.8 kW) air-cooled, gasoline engine
• Generator: 48V 5400W air-cooled brushless
permanent magnet motor
• All-electric traction, steering, lift & reel drive with
no hydraulics
• Tool-Free, Quick-Change cutting units for increased
productivity and reduced maintenance
Greensmaster TriFlex 3300/3320
• 21 HP (15.6 kW), air-cooled, gasoline engine
• All-hydraulic reel circuit (3300)
• All-electric reel circuit (3320)
• Automatic clip control (3320)
• Tool-Free, Quick-Change cutting units for increased
productivity and reduced maintenance
Greensmaster Riding Greensmowers
GREENSMASTER
®
TRIFLEX
®
/eTRIFLEX
™
SERIES
ACCESSORY GUIDE
©2022 The Toro Company. All rights reserved. Rev. 2/22
Accessories and specifications subject to change.
Please contact your Toro distributor for details.
Front Narrow Wiehle Roller
• .2” (5 mm) groove spacing, aluminum, 2.5” (6.4 cm)
diameter
• Slightly more turf penetration than the full roller
• Use in normal greens mowing conditions
Front Wide Wiehle Roller
• .93” (2.4 cm) groove spacing, aluminum
• For more penetration into turf
• Use for mowing higher heights of cut, e.g. fairways
and approaches, and areas which are infrequently cut,
allowing longer grass blades to stand up before cutting
Front Full Roller
• Use on soft greens or high stress conditions to prevent
turf thinning on clean-up cut. Steel sleeve.
Solid Steel Roller Kit
(Set of 1 – Front & Rear)
• Use on puffy turf to control bobbing marks
• Adds weight to stabilize cutting unit over rough surfaces
Greensmaster
TriFlex Series
Greensmaster
eTriFlex Series