Accessories

Fairway Bedknife
• Height of cut range 3/8” – 1” (9.5 – 25.4 mm)
Extended Microcut Bedknife
• Height of cut range 1/16” – 3/16” (1.6 – 4.7 mm)
• Use in high stress conditions and on soft turf to prevent
scalping
• Recommended for use with aggressive bedbar in case of
scalping tendencies
Extended Tournament Bedknife
• Height of cut range 1/8”– 1/2” (3.2 – 12.7 mm)
• Use in high stress conditions and on soft turf to
prevent scalping
• Recommended for use with aggressive bedbar in case of
scalping tendencies
Roller Options
Greensmaster
®
TriFlex
®
/eTriFlex
™
Accessories
Split Front, Full or Narrow Wiehle Roller
• More gentle on turf, especially beneficial on clean-up cut
EdgeMax
™
Microcut Bedknife
• Height of cut range 1/16” – 3/16” (1.6 – 4.7 mm)
• Tool steel bedknife for extended wear and increased
edge retention
• Standard on all cutting units
EdgeMax Tournament Bedknife
• Height of cut range 1/8”–1/2” (3.2 – 12.7 mm)
• Tool steel bedknife for extended wear and increased
edge retention
Bedknife & Bedbar Options
Aggressive Bedbar
• Designed for firm greens where a more efficient, aggressive
cut is needed for more aggressive cultivars
• Not recommended for use in soft turf conditions or periods
of high stress
High Height of Cut Kit (Set of 1)
• Height of cut range 0.285”– 1.00” (7.2 – 25.4 mm), set of one
Less Aggressive Bedbar (Standard)
• Designed for softer greens where a less aggressive cut is
needed for cultivars or periods of high stress
Rear Wiehle Roller (Set of 1)
• 2” (5 cm) cast iron, set of one
Low Cut Bedknife
• Height of cut range 3/16” – 1” (4.7 – 25.4 mm)
• Use for mowing greens, tees or aprons surrounding greens
Microcut Bedknife
• Height of cut range 1/16” – 3/16” (1.6 – 4.7 mm)
• Thinner blades for the most precision and accuracy at lower
heights of cut
Tournament Bedknife
• Height of cut range 1/8” – 1/2” (3.2 – 12.7 mm)
• Recommended for heights of cut above 1/8”
High Cut Bedknife
• Height of cut range 5/16”– 1” (7.9 – 25.4 mm)
• Thicker blade for higher heights of cut, such as tees and
aprons surrounding greens
Accessories and specifications subject to change.
Please contact your Toro distributor for details. Rev. 2/21
DPA Rear Roller Extension Kit
• Moves rear roller back to reduce clipping build-up between
the rear roller and bed bar. Helps avoid clumping.
Rear Roller Adjustment Kit
• Eccentric bolt used to precisely level rear roller
Groomer Options
Universal Groomer Drive
• Groomer drive with forward, neutral and counter-rotating dial
• Quick-change twin-tipped grooming reel or brushes available
Groomer Reel
• High-strength, carbide-tipped groomer blades
• Reduces thatch and stands grass blades for a crisp, clean cut
Grooming Brush
• Spiral rotating brush used to condition grass before cutting
(Note: Brush collects more clippings into basket than the
Groomer Reel, be careful of aggressiveness setting.)
Off-Greens Kit (Anti-Bobbing)
• Patent-pending design with unprecedented results to
reduce bobbing and reduce bobbing marks
• Tuned mass dampener with rubber mounts
• Mounts on each cutting unit suspension
• Use for off-greens, fairway, and aprons applications