Accessories

Greensmaster
®
Flex
™
& eFlex
®
Accessories
Roller Options – 2.5” (64 mm) Diameter
Front Wide Wiehle Roller
• .92” (23mm) groove spacing, aluminum roller
• Most aggressive front roller option
• Recommended for use in off-greens applications on dense turf
and high growth conditions to control growth
Front Narrow Wiehle Roller
• .200” (5mm) groove spacing, aluminum
• Slightly more turf penetration than the full roller
• Use in normal greens mowing conditions
Front Full Roller
• Least penetration into turf
• Recommended for use in soft conditions and high stress
periods to prevent thinning of turf and edge marking of
cutting unit
Rear Full Roller
• Standard rear roller
• 2.0” (50mm) diameter, aluminum
Steel Rear Full Roller
• 2.0” (51mm) diameter, steel
• Steel roller increases weight on cutting unit for deeper
penetration
• Recommended for use in combination with rear roller
scraper to reduce wear
Split Front, Full or Narrow Wiehle Roller
• More gentle on turf, especially beneficial on clean-up cut
Rear Roller Adjustment Kit
• Eccentric bolt used to precisely level rear roller
Front Roller Extension Kit
• Roller extension wheels that attach on outside of front roller
• Used on soft turf or heavily undulated greens to prevent
edge marking of cutting unit
Long Front Wiehle Roller
• Improves edge support and prevents edge marking on
cutting unit
• Use in soft turf conditions
Extended Tournament Bedknife
• Height of cut range between 1/8” – 1/2” (3mm – 12.7mm)
• Recommended for use in combination with the Aggressive
Bedbar if scalping occurs
EdgeMax
TM
Microcut Bedknife
• Tool steel bedknife for extended wear
• 21” (53 cm)
EdgeMax
TM
Tournament Bedknife
• Tool steel bedknife for extended wear
• 21” (53 cm)
Tournament Bedknife
• Height of cut range 1/8” – 1/2” (3 – 13mm)
• Thicker blade for longer lasting bedknife life
Bedknife & Bedbar Options
Aggressive Bedbar
• Cutting edge moves farther behind center line of reel
• Designed for firm greens where a more efficient, aggressive
cut is needed for more aggressive cultivars
• Not recommended for use in soft turf conditions or in
periods of high stress. Note: May result in scalping of turf
Height of Cut Adjustment Bar
• Adjustment bar used to adjust cutting heights
High Height of Cut Kit
• Enables heights of cut up to .94” (23.8mm)
Low Cut Bedknife
• Height of cut range 3/16 – 1” (5 – 25mm)
Microcut Bedknife
• Height of cut range between 1/16” – 3/16” (2 – 5mm)
• Recommended for heights of cut below 1/8” (3mm)
Extended Microcut Bedknife
• Height of cut range between 1/8” – 1/2” (3mm – 12.7mm)
• Recommended for use in combination with the Aggressive
Bedbar if scalping occurs
Accessories and specifications subject to change.
Please contact your Toro distributor for details. Rev. 4/19
Groomer Options Traction Unit Options
Universal Groomer Drive
• Groomer drive with forward, neutral and counter-rotating dial
• Quick-change twin-tipped grooming reel or brushes available
Operator Presence Bail Kit
• Safety feature that kills engine if operator releases handle
Push Broom Brush
• Conditions grass prior to cut
• Primarily used on Bermuda grass or other warm season grasses
to stand and straighten grass blades for a crisp, clean cut
Groomer Reel
• High-strength, carbide-tipped groomer blades
• Reduces thatch and stands grass blades for a crisp, clean cut
Grooming Brush (Soft or Stiff)
• Spiral rotating brush used to condition grass before cutting
(Note: Brush collects more clippings into basket than the
Groomer Reel, be careful of aggressiveness setting.)