Data Sheet

2
Rev. 2/22
Greensmaster
®
e1021 Specifications*
The Greensmaster e1021 is manufactured in Tomah, WI ISO 9002 Certified Plant.
GREENSMASTER e1021, MODEL 04831
POWER
Lithium-Ion battery pack – nominal 50.4-Volt 26.7 A-Hr (42 – 56 volt, 1.345 kW-hr) with integrated battery management system utilizing CAN communication with the
machine controller and charger. Single battery affixed to unit and charged onboard.
ELECTRIC MOTOR
Brushless permanent magnet DC motor with integral motor controller and helical gear reduction.
BATTERY CHARGER
Voltage and current controlled with CAN communication to manage battery health. Complies to max voltage and current limits directed by the battery management system.
FRAME
Fully modular design allows quick disassembly for service/maintenance of all major components.
TRANSMISSION
Permanent Magnet DC motor directly coupled to a fully gear-driven transmission with integral traction differential and traction disconnect to ease movement during
service/maintenance operations. Interchangeable drum drive gear cases.
MAINTENANCE
No grease zerks, sealed bearing design reduces daily maintenance. Onboard backlapping standard.
GROUND SPEED
Mowing speed: 2.0-3.5 mph (3.2-5.6 km/h). Transport speed: (maximum): 5.3 mph (8.5 km/h) with optional transport tires
TRACTION DRUM
Dual position traction drum with positions for contour following or forward weight bias at higher heights of cut.
BRAKE
Service/parking - band type.
CONTROLS
Start/On/Off (‘ignition’) switch, LCD Information Center (reports multiple parameters including hours, battery life, faults, diagnostics, backlap control, etc.) throttle,
dual function traction/safety bail, reel engage lever, service/parking brake lever, optional light switch.
HANDLE
Loop handle with telescoping adjustment of 5" (12.7 cm) total travel, rubber isolated to minimize operator influence during mowing.
TRANSPORT TIRES/KICKSTAND
Quick detachable 3.00/3.25 x 6 pneumatic (optional). Loop style with service position lock.
CUTTING UNIT OPTIONS
8, 11 or 14-blade cutting unit options.
CUTTING UNIT ATTACHMENT
Detachable cutting unit allows easy removal for service / maintenance or cutting unit exchange for different applications.
WIDTH OF CUT
21" (53.3 cm)
HEIGHT OF CUT RANGE
For Greens: (Drum Position One) 0.062" to 0.312" (1.5 mm to 8 mm) For Tees: (Drum Position Two) 0.25" to 0.625" (6 mm to 16 mm)
High Height of Cut Kit: (Drum Position Two) 1.18" (30 mm)
CUTTING UNIT DRIVE
Quick-change dual speed gear drive combined with positive drive belt for (4) possible reel speed/clip settings.
FRONT ROLLER
Front Roller: Optional – must be ordered.
WEIGHT
240 lbs. (109 kg) with 11-blade cu and aluminum wiehle roller.
CERTIFICATION /WARRANTY
Designed in accordance to ANSI/CE/WEEE/ROHS/C-TICK. Four-year warranty on Lithium-Ion Battery. Refer to the Operator’s Manual for further details.
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration
purposes only. Actual products offered for sale may vary in design, required attachments and safety features. Consult your
local Toro Distributor.
GREENSMASTER e1021 ACCESSORIES
BEDKNIFE OPTIONS
115-1880 EdgeMax
TM
Microcut (standard)
108-4303 Extended Microcut
108-4302 Extended Tournament
115-1881 EdgeMax
TM
Tournament
139-4320 EdgeMax
TM
Short Microcut
139-4321 EdgeMax
TM
Short Tournament
137-0879 EdgeMax
TM
Fairway Bedknife
63-8610 Fairway
93-4262 Microcut
93-4263 Tournament
93-4264 Low Cut
94-6392 High Cut
CUTTING UNITS & REEL OPTIONS
04832 8-Blade DPA EdgeSeries™ Cutting Unit
04833 11-Blade DPA EdgeSeries™ Cutting Unit
04834 14-Blade DPA EdgeSeries™ Cutting Unit
ROLLER OPTIONS
04805 Interlaced Narrow Wiehle Roller
04815 Full Front Roller
04141 Extended Narrow Wiehle Roller
04267 Paspalum Wiehle Roller
04249 Split Front Roller – Full
04250 Split Narrow Wiehle Roller
04825 Wide Wiehle Roller
115-7361 Auxiliary Roller Extension Kit
140-3363
Interlaced Narrow Wiehle Roller – Heavy
SCRAPER/BRUSH OPTIONS
139-4383
Interlaced Narrow Wiehle Roller
Scraper/Brush
139-4385 Interlaced Narrow Wiehle Roller Scraper
115-7378 Wide Wiehle Roller Scraper/Brush
125-3504 Wide Wiehle Roller Scraper
115-7379 Full Roller Scraper/Brush
125-3505 Full Roller Scraper
GROOMER OPTIONS
04707 Universal Groomer Drive
04270 Grooming Brush – Soft
04271 Grooming Brush – Stiff
04802 Twin Tip Groomer Blade Assembly
TRACTION UNIT ACCESSORIES
04135 LED Light Kit
04138 Cutting Unit Light Kit Mount
04136 Push Broom Kit
04123 Wheel Kit
139-4342 Backlap Access Kit
115-4754 Wireless Hour Meter
99-4286 High Height of Cut Kit
04065 Charger
04070 Replacement Battery
TOOLS AND MAINTENANCE OPTIONS
04399 Turf Evaluator
125-5610 Paper – Reel
140-5531 Shim – Reel
94-9010 Height of Cut Adjustment Bar
131-6828 Angle Indicator
131-6829 Mount-Angle Indicator