Accessories

Extended Microcut Bedknife
• Height of cut range 1/16” – 3/16” (1.6 – 4.8mm)
• Use in high stress conditions and on soft turf to prevent
scalping
• Recommended for use with aggressive bedbar in case of
scalping tendencies
Extended Tournament Bedknife
• Height of cut range 1/8”– 1/2” (3.2 – 12.7mm)
• Use in high stress conditions and on soft turf to prevent
scalping
• Recommended for use with aggressive bedbar in case of
scalping tendencies
EdgeMax
TM
Microcut Bedknife
• Height of cut range 1/16” – 3/16” (1.6 – 4.8mm)
• Tool steel bedknife for extended wear and increased edge
retention
EdgeMax
TM
Tournament Bedknife
• Height of cut range 1/8”–1/2” (3.2 – 12.7mm)
• Tool steel bedknife for extended wear and increased edge
retention)
EdgeMax
TM
Fairway Bedknife
• Height of cut range 3/8” – 1.0” (9.5 – 25.4mm)
• Tool steel bedknife for extended wear and increased edge
retention
• 7-hole mount, fits all DPA cutting units
Cutting Unit & Reel Options
Greensmaster
®
3150-Q / 3250-D Accessories
8-Blade Cutting Unit
• Designed for mowing on higher heights of cut, such as
approaches, fairways or tee boxes
• Heights of cut above 3/8” (9.5mm)
Microcut Bedknife
• Height of cut range 1/16” – 3/16” (1.6 – 4.8mm)
• Thinner blades for the most precision and accuracy at
lower heights of cut
14-Blade Cutting Unit
• Designed or extremely fine greens mowing
• Best for use at heights of cut under .100” (2.5mm)
8-Blade Heavy-Duty Reel
• More robust reel for mowing rough surfaces
• Used for heights of cut above 3/8” (9.5mm) on fairways and
other off-greens applications
Bedknife & Bedbar Options
Roller Options
Aggressive Bedbar
• Designed for firm greens where a more efficient, aggressive
cut is needed for more aggressive cultivars
• Not recommended for use in soft turf conditions or periods
of high stress
High Height of Cut Kit
• Enables heights of cut up to .94” (23.8mm)
11-Blade Cutting Unit
• Designed for mowing on lower heights of cut
• Use on greens and tee boxes up to 3/8” (9.5mm)
Front Wide Wiehle Roller (set of 1)
• .93” (2.4 cm) groove spacing, aluminum
• Highest penetration into turf
• Use for mowing higher heights of cut, e.g. fairways and
approaches
• Use for areas which are infrequently cut
Cast Iron Rear Wiehle Roller
• 2” (5 cm) diameter, Cast Iron
• Special greens application to maximize turf penetration
Note: Used in greens applications, the Cast Iron Rear Wiehle
Roller may leave grooved roller marks
Front Narrow Wiehle Roller (set of 1)
• .200” (5mm) groove spacing, aluminum
• 2” (5 cm) diameter
• Slightly more turf penetration than the full roller
• Use in normal greens mowing conditions
Solid Steel Narrow Wiehle Roller
• Adds weight to stabilize cutting unit over rough surfaces
• Single, replacement roller (no rear roller included)
Front Full Roller (set of 1)
• Use on soft greens or high stress conditions to prevent
thinning on clean-up cut, steel
Rear Roller Adjustment Kit
• Eccentric bolt used to precisely level rear roller
DPA Rear Roller Extension Kit
• Moves rear roller back to reduce clipping build-up between the
rear roller and bed bar
• Helps avoid clumping
Solid Steel Wide Wiehle Roller Kit
(Front Wiehle & Rear Steel Rollers)
• Use on puffy fairways to control bobbing marks
• Adds weight to stabilize cutting unit over rough surfaces
• Kit includes one steel front Wiehle roller and one steel rear
roller
Steel Rear Roller
• Replacement rear roller
Off-Greens Kit (Anti-Bobbing)
• Patented design with unprecedented results to reduce
bobbing and reduce bobbing marks
• Use for off-greens, fairway, and aprons applications
Tournament Bedknife
• Height of cut range 1/8” – 1/2” (3.2 – 12.7mm)
• Recommended for heights of cut above 1/8” (3.2mm)
Low Cut Bedknife
• Height of cut range 3/16” – 1.0” (4.8 – 25.4mm)
• Use for mowing greens, tees, or aprons surrounding greens
High Cut Bedknife
• Height of cut range 5/16”– 1.0” (7.9 – 25.4mm)
• Thicker blade for higher heights of cut, such as tees and
aprons surrounding greens
Fairway Bedknife
• Height of cut range 3/8” – 1.0” (9.5 – 25.4mm)
Accessories and specifications subject to change.
Please contact your Toro distributor for details. Rev. 2/21
5-Blade Heavy-Duty Reel
• More robust reel for mowing rough surfaces
• Used for heights of cut above 3/4” (19mm) on fairways and
other off-greens applications
Split Front, Full or Narrow Wiehle Roller
• More gentle on turf, especially beneficial on clean-up cut