Data Sheet

2
Rev. 1/20
* Specifications and design subject to change without notice. Products depicted in
this literature are for demonstration purposes only. Actual products offered for sale
may vary in use, design, required attachments and safety features. Consult your local
Toro Distributor.
The Greensmaster Flex 1018 & 1021 are
manufactured in Tomah, WI ISO 9002
Certified Plant.
Greensmaster
®
Flex
™
1018 & 1021 Specifications
*
GREENSMASTER FLEX 1018, MODEL 04850 GREENSMASTER FLEX 1021, MODEL 04860
ENGINE
Honda GX120 - 3.5 hp (2.6 kW) @3600 rpm, gasoline with integral lighting coil.
FUEL CAPACITY
2.1 qts (2L)
FRAME
Fully modular design allows quick disassembly for service / maintenance of all major components.
TRACTION DRIVE
Full gear drive transmission with integral traction differential and traction drive disconnect to ease movement during service/maintenance operations.
Interchangeable drum drive gear cases.
TRACTION DRUM
Tapered traction drum for improved after cut appearance.
GROUND SPEED
Mowing Speed: 2.0 mph (3.2 km/h) to 3.5 mph (5.6 km/h) Transport Speed: 5.3 mph (8.5 km/h)
CLUTCH
Externally-mounted two sided dry disc clutch actuated by dual motion bail.
BRAKE
Service/parking – band type.
CUTTING UNIT DRIVE
Quick-change dual-speed gear drive, combined with positive drive belt – 4 possible reel speeds/clip settings.
CUTTING UNIT ATTACHMENT
Tool-free cutting unit removal for service/maintenance or cutting unit exchange for different uses.
CUTTING UNIT OPTIONS
11-blade cutting unit 14-blade cutting unit
CONTROLS
Engine mounted: recoil starter, choke, fuel shutoff.
Handle mounted: on/off switch, throttle lever, dual motion traction / safety bail, reel engage lever, service/park brake lever, hour meter, light switch (optional).
HANDLE
Loop handle with telescoping adjustment with 5" (12.7 cm) total travel, rubber isolated to minimize operator influence during mowing.
TRANSPORT TIRES / KICKSTAND
Optional – Two, quick-detachable pneumatic tires (3.00X3.25-6). Kickstand is standard.
WIDTH OF CUT
18" (45.7 cm) 21" (53.3 cm)
HEIGHT OF CUT RANGE
For Greens: (Spacer Position One) 0.062" to 0.250" (1.5 mm to 6 mm)
For Tees: (Spacer Position Two) 0.125" to 0.500" (3 mm to 12 mm)
High Height of Cut Kit: 0.375 to 1.00" (9 mm to 25 mm)
WEIGHT
267 lbs (121 kg) with 11-blade cutting unit, aluminum Wiehle roller. 275 lbs (125 kg) with 11-blade cutting unit, aluminum Wiehle roller.
MAINTENANCE REQUIREMENTS
No daily greasing required.
CERTIFICATION
Designed in accordance to applicable ANSI and CE specifications.
WARRANTY
Two-year limited warranty. Refer to the Operator’s Manual for further details.
GREENSMASTER FLEX 1021 ACCESSORIESGREENSMASTER FLEX 1018 ACCESSORIES
GROOMER OPTIONS
04648 Universal Groomer Drive
04802 Twin Tip Groomer Blade ASM
04270 Grooming Brush – Soft
04271 Grooming Brush – Stiff
CUTTING UNITS & REEL OPTIONS
04863 11-Blade Flex ES Cutting Unit
04864 14-Blade Flex ES Cutting Unit
SCRAPER OPTIONS
125-3503 Narrow Wiehle Roller Scraper Kit
115-7377 Narrow Wiehle Roller Scraper/Brush Kit
125-3504 Wide Wiehle Roller Scraper Kit
115-7378 Wide Wiehle Roller Scraper/Brush Kit
125-3505 Smooth Roller Scraper Kit
115-7379 Smooth Roller Scraper/Brush Kit
ROLLER OPTIONS
04027 Narrow Wiehle Roller ASM
04825 Wide Wiehle Roller ASM
04815 Full Roller ASM
04028
Paspalum Roller ASM
04029 Extended Narrow Wiehle Roller ASM
04249 Split Full Roller ASM
04250 Split Narrow Wiehle Roller ASM
107-3510 Narrow Wiehle Roller ASM – Steel
115-7361 Roller Extension Kit
CUTTING UNITS & REEL OPTIONS
04853 11-Blade Flex ES Cutting Unit
04854 14-Blade Flex ES Cutting Unit
BEDKNIFE OPTIONS
117-1530 EdgeMax
TM
Microcut Bedknife
110-2300 Extended Microcut Bedknife
110-2301 Lowcut Bedknife
117-1532 EdgeMax
TM
Tournament Bedknife
139-4318 EdgeMax
TM
Short Microcut Bedknife
139-4319 EdgeMax
TM
Short Tournament Bedknife
98-7260 Tournament Bedknife
98-7261 Microcut Bedknife
ROLLER OPTIONS
04026 Narrow Wiehle Roller ASM
140-3441 Wide Wiehle Roller ASM
04814 Full Roller ASM
140-9214 Extended Narrow Wiehle Roller ASM
115-7361 Roller Extension Kit
TRACTION UNIT ACCESSORIES
04135 LED Light Kit
04136 Push Broom Kit
04123 Wheel Kit
139-4342 Backlap Access Kit
139-4369 Wireless Hour Meter
TRACTION UNIT ACCESSORIES
04135 LED Light Kit
04136 Push Broom Kit
04123 Wheel Kit
139-4342 Backlap Access Kit
139-4369 Wireless Hour Meter
SCRAPER/BRUSH OPTIONS
120-9615 Narrow Wiehle Roller Scraper Kit
120-9621 Narrow Wiehle Roller Scraper/Brush Kit
120-9616 Wide Wiehle Roller Scraper Kit
120-9622 Wide Wiehle Roller Scraper/Brush Kit
120-9617 Smooth Roller Scraper Kit
120-9623 Smooth Roller Scraper/Brush Kit
GROOMER OPTIONS
04648 Universal Groomer Drive
04801 Twin Tip Groomer Blade ASM
04268 Grooming Brush – Soft
04269 Grooming Brush – Stiff
TOOLS AND MAINTENANCE OPTIONS
04399 Turf Evaluator
125-5610 Paper – Reel
125-5611 Shim – Reel
94-9010 Height of Cut Adjustment Bar
131-6828 Angle Indicator
131-6829 Mount-Angle Indicator
TOOLS AND MAINTENANCE OPTIONS
04399 Turf Evaluator
125-5610 Paper – Reel
125-5611 Shim – Reel
94-9010 Height of Cut Adjustment Bar
131-6828 Angle Indicator
131-6829 Mount-Angle Indicator
BEDKNIFE OPTIONS
115-1880 EdgeMax
TM
Microcut Bedknife
108-4303 Extended Microcut Bedknife
108-4302 Extended Tournament Bedknife
115-1881 EdgeMax
TM
Tournament Bedknife
139-4320 EdgeMax
TM
Short Microcut Bedknife
139-4321 EdgeMax
TM
Short Tournament Bedknife
63-8610 Fairway Bedknife
93-4262 Microcut Bedknife
93-4263 Tournament Bedknife
93-4264 Low Cut Bedknife
94-6392 High Cut Bedknife