Accessories

Greensmaster
®
1000 Series Accessories
Roller Options – 2.5” (64 mm) Diameter
Front Wide Wiehle Roller
• .92” (23mm) groove spacing, aluminum roller
• Most aggressive front roller option
• Recommended for use in off-greens applications on dense turf
and high growth conditions to control growth
Front Narrow Wiehle Roller
• Interlaced .200” (5mm) groove spacing, aluminum
• Slightly more turf penetration than the full roller
• Use in normal greens mowing conditions
Front Full Roller
• Least penetration into turf
• Recommended for use in soft conditions and high stress
periods to prevent thinning of turf and edge marking of
cutting unit
Split Front, Full or Narrow Wiehle Roller
• More gentle on turf, especially beneficial on clean-up cut
Front Roller Extension Kit
• Roller extension wheels that attach on outside of front roller
• Used on soft turf or heavily undulated greens to prevent
edge marking of cutting unit
Long Front Wiehle Roller
• Improves edge support and prevents edge marking on
cutting unit
• Use in soft turf conditions
Microcut Bedknife
• Height of cut range between 1/16” – 3/16” (2 – 5mm)
• Recommended for heights of cut below 1/8” (3mm)
Extended Microcut Bedknife (18” & 21” only)
• Height of cut range between 1/8” – 1/2” (3mm – 12.7mm)
• Recommended for use in combination with the Aggressive
Bedbar if scalping occurs
Low Cut Bedknife
• Height of cut range 3/16 – 1” (5 – 25mm)
EdgeMax
TM
Microcut Bedknife (Standard Equipment)
• Tool steel bedknife for extended wear
• 21” (53 cm)
EdgeMax
TM
Tournament Bedknife
• Tool steel bedknife for extended wear
• 21” (53 cm)
Bedknife & Bedbar Options – Fit All Models Unless Indicated
Height of Cut Adjustment Bar
• Adjustment bar used to adjust cutting heights
High Height of Cut Kit
• Enables heights of cut up to 1.18” (30mm)
EdgeMax
TM
Short Bedknife
• Tool steel bedknife for extended wear
Tournament Bedknife
• Height of cut range 1/8” – 1/2” (3 – 13mm)
• Thicker blade for longer lasting bedknife life
Extended Tournament Bedknife (21” only)
• Height of cut range between 1/8” – 1/2” (3mm – 12.7mm)
• Recommended for use in combination with the Aggressive
Bedbar if scalping occurs
Accessories and specifications subject to change.
Please contact your Toro distributor for details. Rev. 2/22
Groomer Options Traction Unit Options
Universal Groomer Drive
• Groomer drive with forward, neutral and counter-rotating dial
• Quick-change twin-tipped grooming reel or brushes available
Backlap Kit (1021 & 1026 models only)
• Convenient on-machine backlapping (not required for
e1021 model)
Push Broom Brush
• Conditions grass prior to cut
• Primarily used on Bermuda grass or other warm season grasses
to stand and straighten grass blades for a crisp, clean cut
Groomer Reel
• High-strength, twin-tip groomer blades
• Reduces thatch and stands grass blades for a crisp, clean cut
Grooming Brush – Soft or Stiff
• Spiral rotating brush used to condition grass before cutting
(Note: Brush collects more clippings into basket than the
Groomer Reel, be careful of aggressiveness setting.)
Backlap Access Kit
• Required for auxiliary electric motor backlapping
• Provides convenient access for most reel grinders