Instructions / Assembly

Parts List

Pg. 1

When assembling your Grande Reection Trellis, select an area close to where

it will be used. The assembly area should be relatively at and open. Always use

caution to avoid injury during assembly and transport.

Main trellis assembly

Trellis legs 2 ea. with predrilled

holes for screws.

#8 1 ¾” screws, 4 pcs.

PAGE 1
Parts List Main trellis assembly Trellis legs 2 ea. with predrilled holes for screws. #8 1 ¾” screws, 4 pcs. When assembling your Grande Reflection Trellis, select an area close to where it will be used. The assembly area should be relatively flat and open. Always use caution to avoid injury during assembly and transport. Pg.
PAGE 2
Place the main trellis assembly a flat surface. face down on Position legs to the back surface of the main trellis assembly so that the predrilled holes lay in the center of the horizontal cross pieces of the main trellis. Place screws into the 2 predrilled holes on each trellis leg and using a screwdriver or a power drill secure the legs to the main trellis. 4. Your Grande Reflection Trellis is now ready to be installed in the area of your choice. Pg.
PAGE 3
2. 3. Pg.
PAGE 4
Great Lakes Outdoor Living Cedar Wood Finishing Oil Cedar Wood Finishing Oil is available to purchase on our website: www.greatlakesoutdoorliving.com We recommend lining the planter cavity with landscape fabric to allow for excess water drainage. An alternative to filling the planter with soil is to place potted plants within the container.