User Manual

用户使用FPV时须接上图传板和2P连接线，图传板USB接口与Gopro Hero3的USB接
口连接，2P连接线连接云台主控板和图传板，通过内部走线到云台顶部输出图传接口，
图传接口与图传发射端连接。
（用户不适用FPV时，可不接图传板和2P连接线）
When using FPV, attach FPV board with a 2p cable. Link up USB connector on FPV board
with the Gopro Hero3 cable. Also connect 2p cable with Gimbal main control board and FPV
board. Through internal alignment to the Gimbal top (the output FPV interface), FPV
connector connects with FPV transmission port. (unnecessary to connect FPV board with 2p
cable with FPV is not in use).
图传板连接图
FPV Connection Guide
4
规格参数 specification
工作电压 (Working Voltage) :
工作电流 Working Current ( ):
俯仰角范围 Pitch angle range ( ):
横滚角范围 Roll angle range ( ):
3S锂电 3S LiPo Battery
500~600mA
(向上)-48°~+ 95°(向下) (up) -48°~+ 95°(down)
(向左)-35°~+ 35°(向右) (left) -35°~+ 35°(right)
航向角范围 Yaw angle range ( ):
（左旋left）-45°~+45°（右旋right）
云台重量 Weight ( ):
168G(不含gopro相机without Gopro)
云台尺寸 Dimension ( ):
云台工作温度范围 Working temperature ( ):
控制精度 Control Accuracy ( ):
适用拍摄设备 Application ( ):
87.3mm×80mm×94.4mm
-10℃~70℃
0.1°
银色和黑色 Silver and Black GoPro3，GoPro3+
四、特性 Features：
五、设置 Settings：
1、安装驱动和下载调参软件 Install the driver and download the GUI:
(1)根据电脑系统选择合适的PL2303驱动。
Select the appropriate PL2303 drive based on computer system.
(2)下载调参软件，无需安装。
Download the parameter adjusting software without installation.
(3)先通过USB线连接云台和电脑，再打开GUI。
Connect the Gimbal with the computer by USB first, and then open GUI.
(4)选择正确的电脑串口，连接GUI。
Select correct serial port, and connect with GUI.