User Manual

3
电源信号排线×1 wire for power and signal
源信号排线一头是7PIN接头，另外一边是由JST接
头和杜邦线组成,红黑的JST接头是接电源，杜邦线
连接图传和遥控。
One end is 7PIN connector,and the other end is
JST and Dupont Line. Red and black JST is for
power, and Dupont Line is for FPV and remote
control.
图传连接套件×1 FPV connection set
图 传 连 接 套 件 包 括 USB连 接 板 和 2PIN连 接 线 ，
USB连接板连接gopro Hero3的USB接口，2PIN连
接线连接云台主控板和USB连接板。
Includes USB connection board and 2PIN connection wires.
USB connection wire is to Connect to the USB port of gopro
Hero3. 2PIN connection wire is to connect main control board
of gimbal and USB connection board.
三、云台安装 Gimbal Assembly:
1、云台×1 Gimbal
安装图 Gimbal Assembly Guide
1 2
3
4
防坠落卡扣(母)4pcs
Anti dropping buckle (female)
防坠落卡扣(公)4pcs
Anti dropping buckle (Male)
杯头内六角螺丝（M3X7)8PCS
Hexagon socket head cap screws(M3x7)
安装云台悬挂钩
安装精灵2机架
Install on phantom 2
杯头内六角螺丝（M2.5X6)2PCS
Hexagon socket head cap screws(M2.5x6)
Install gimbal hanger