User Manual

一、简介 Brief Introduction :

GH3-3D是为航拍爱好者研发的针对gopro Hero3相机研制的三轴无刷云台，云台框架采用高强度

的工程塑胶材料，在保证云台强度足够的同时，大大减轻了云台的重量。云台的整体设计小巧便携、安

装简易。GH3-3D塑胶三轴云台使用高速的32位处理器、高精度传感器和优秀的控制算法，拍出高效稳

定的画面。

The GH3-3D 3 Axis Brushless Gimbal is designed for the aerial photography hobbyist, using the GoPro Hero3

and 4. Its gimbal framework is composed of engineered polycarbonate, which can support enough strength

and greatly reduce the weight of the gimbal. The overall design is compact, convenient and easy to install.

The GH3-3D 3 Axis Brushless Plastic Gimbal uses high-speed 32-bit MCU, a high-precision sensor and

excellent control algorithm, which can ensure high-quality and stable videos.

二、物品清单 Item List：

1、云台×1 Gimbal

免调试三轴无刷云台集成系统，采用减震球一体化设计，减少

飞机的高频振动对云台的影响。内置控制板、IMU模块和电机

电源线，使得云台外观更加整洁。

Commissioning – free three axis gimbal system with integrated

design of shock absorption balls, reduce the influence from high-

frequency vibration of aircraft to gimbal. Built-in control board,

IMU module and motor power line make the gimal compact.

2、上减震板×1 Top shock absorption plate

先把4个减震球安装在上减震板上，再把上减震板固定在飞机上。

Mount 4 shock absorption balls on the shock absorption plate,

then install the shock absorption plate on the aircraft.

3、配件盒×1 Accessories pack

配件盒内有防脱落件、螺丝包、图传板和各类连接线配件。

There are anti-drop kits, screws, FPV board and all the wires in the pack.

防脱落件×4 anti-drop kits

相机固定件×1 Camera fix kit

螺丝包Screws

M2.5×6：用于锁紧相机到云台

for locking camera on gimbal

M3×8：用于安装减震装置到飞行器上

for install shock absorption device On the flight vehicle