Instructions / Assembly

10.Caulk Gun (for sealing joints and gaps)
11.House Wrap and Tape (provided in dry-in kit)
12.Peel-and-Stick Membrane (for roof underlayment) (provided in dry-in kit)
13.Roofing Shingles (provided in dry-in kit)
14.Deck finishes and sealer (provided in dry-in kit if the steel stud kit has a deck)
15.Hardie Board and Sealant (provided in dry-in kit)
16.Cable Rails and Installation Kit (provided in dry-in kit if the steel stud kit has a deck)
17.Spiral Staircase Kit (as per manufacturer's instructions) (provided in dry-in kit if the
steel stud kit has a deck)
Step-by-Step Procedure - Roof OSB Installation:
1. Prepare the Roof Structure:
● Ensure the steel roof trusses are properly installed, spaced, and level
● Clean the surface of the steel trusses from any debris or sharp edges
2. Apply Sealant:
● Apply a bead of sealant along the top of each steel truss where the OSB will be
placed. This will create a waterproof barrier
3. Place the OSB Sheets:
● Begin at one corner of the roof. Place the first OSB sheet with its long edge
perpendicular to the steel trusses
● Ensure the sheet overhangs the roof edges evenly
● Press the OSB sheet onto the sealant to create a secure bond
4. Secure with Screws: