Instructions / Assembly

● Level
2. Measure and Cut:
● Measure the length of the fascia and skirt trim needed for each side of the house
● Use a saw to cut the trim pieces to the measured lengths
3. Positioning Fascia Trim:
● Position the fascia trim along the edge of the roof, ensuring it is level and aligned
correctly
● Secure the fascia trim to the steel frame using suitable screws. Space the screws
evenly along the length of the trim to ensure a secure attachment
4. Positioning Skirt Trim:
● Position the skirt trim around the bottom perimeter of the house, ensuring it is level
and fits snugly against the steel frame
● Secure the skirt trim to the steel frame using appropriate screws. Again, space the
screws evenly for a secure attachment
5. Check Alignment:
● Double-check the alignment and levelness of both the fascia and skirt trim. Make
any necessary adjustments before fully securing them in place
6. Seal Joints:
● Apply a suitable sealant to the joints and gaps between the trim and the steel
frame to prevent water infiltration and enhance durability
7. Finishing Touches:
● Once the trim pieces are securely attached and sealed, inspect the entire
installation for any gaps, unevenness, or loose screws
● Make any final adjustments and tighten screws as needed
Important Notes:
● Always follow local building codes and manufacturer instructions
● When in doubt, consult with a professional contractor or builder
● Safety gear, including gloves, safety glasses, and ear protection, is essential during
construction