Instructions / Assembly

Best Practices:
● Roof House Wrap: For roofs, the house wrap typically goes over the OSB, followed
by the peel-and-stick underlayment for roofing. This ensures that water shedding
from the roof doesn't get behind the house wrap
● Overlap and Tape: Properly overlap house wrap seams and tape them to create a
continuous and sealed barrier. Overlapping ensures that water sheds off the wrap
and doesn't penetrate the structure
● Follow the manufacturer's instructions for proper installation
● Install roofing shingles as per the shingle manufacturer's guidelines
Roof Top Decks (refer to notes above)
1. Prepare OSB and Apply Membrane Coating: A clean and dry surface is crucial.
● Ensure OSB is securely in place
● Apply the first membrane coating on the OSB. Using a Roller and paint brush
for the corner
● Let it dry for 24 hours before proceeding. Then apply the self-adhesive
fibreglass Mesh
2. Create Waterfall Effect:
● Apply a thicker layer of membrane coating from the edge, creating a
waterfall effect for water runoff.
● Allow this coat to dry for 24 hours.
● Apply the primer provided on the membrane using a roller. Refer to the
manufacturer’s guide on the label.