Instructions / Assembly

Window and Door Openings:
● Flashing Tape: Apply window and door flashing tape around the openings. Properly
seal the corners and edges to create a water-resistant barrier
● Self-Adhesive Flashing Membrane: For additional protection, apply self-adhesive
flashing membrane over the flashing tape. This creates a more robust seal,
especially in areas prone to heavy rainfall or wind-driven rain
Door and Window Installation: Including Sliding door if the home kit has a sliding door
● Follow the manufacturer's instructions for installing doors and windows. Typically,
you'll use screws designed for metal framing
● Properly level and plumb each window and door before securing them in place
Materials Needed:
● New windows, prehung doors, or sliding doors
● Flashing tape (self-adhesive waterproof barrier)
● Window and door membrane (or window flashing)
● Screws compatible with steel framing (consult manufacturer guidelines)
● Foam insulation or expanding foam sealant.
● Caulk gun and weather-resistant caulk
● Level, shims, and fasteners
Step-by-Step Guide:
1. Preparing the Opening:
● Ensure the opening is clean, level, and free of debris
● After the house wrap is applied to the exterior of the wall, including the openings.
Cut openings for windows and doors, ensuring the wrap is integrated and sealed
around these openings. The house wrap goes on the outside of the frame openings
2. Installing Windows and Doors:
● Apply a continuous bead of caulk around the interior perimeter of the window or
door frame