Manual

20
Gateway Settings
Satellite Settings allows you to set gateway parameters such as Time, Date and Language.
• Use the Up or Down Arrows to navigate through the menus.
• Use the Left and Right Arrow to advance to the next entry eld on the same menu line.
• Use the Input Dial to select values when editing.
Command Function
Comm Mode: Use this menu item to select the gateway mode of operation between Central, Local or O mode.
Hold All: Use this menu item to suspend satellite operation and choose the suspension duration from Today, 02-
30 days, Permanent or None. is does not aect manual starts from the front panel.
Hold Rain: Use this option to suspend satellite operation and choose the suspension duration from Today, 02-30
days, Permanent or None. When activated, Hold Rain will cancel any current watering, along with
suspending operation. is does not aect manual starts from the front panel.
Reset Sta’s: Use this menu item to reset all station settings by selecting Yes. After selecting Yes, press the Up or
Down Arrows
to activate. ere is countdown before the command executes. e following
will display:
Reset All Stations
to defaults
05
STOP to escape
All station settings will be erased after a successful reset.
Reset Unit: Use this menu item to reset the gateway settings by selecting Yes. Select Yes using the Input Dial
and press the Up or Down Arrows to activate.ere is countdown before the
gateway reboots. e following will display:
Reset All Defaults
10
STOP to escape
!
Resetting the unit will erase all user-dened program data and conguration values in the
gateway’s memory.
Power Mode: Use this menu item to change the power mode from switched to continuous. e default mode is
switched. Continuous mode is helpful for troubleshooting.
Enable Sta’s: Use this menu item to reset all disabled stations with one execution. Select Yes All using the Input Dial
and press the Up or Down Arrows to activate. Select No to cancel. Individual
stations can be enabled/disabled by using the Disable function within the Station Settings menu.
Language: Default language is English. Future option: Spanish.
Clock Set:
Use this menu item to set the current time. Use the Left and Right Arrow Keys
to select the
Hours and Minutes parameters then use the Input Dial
to modify the values.
Clock Mode: Use this menu item to select the clock mode between Am/Pm (12-Hour) and 24-Hour mode.
Date Mode: Use this menu item to select the date mode: MMDDYY or DDMMYY.
Date:
Use this menu item to set the current date. Use the Left and Right Arrow Keys
to select the
Month, Date and Year parameters then use the Input Dial
to modify the values.