Manual

18
Power-Up Diagnostics
Upon power-up, the gateway will display:
Gateway TM Booting
e Gateway TM will initiate a diagnostic test automatically during power-up. is function will take approximately ten
seconds and it can not be bypassed. If a problem is detected during the diagnostic test, it will be indicated on the display.
ese status information cannot be edited. e information is as follows:
Line 1: Gateway Firmware Version and Revision Date
Line 2: Last Power Downtime Date and Time
Example:
Rev: 4.00 09/15/10
PD - 09/16/10
e default Home display will follow after the diagnostic display has timed-out.
Home display example:
Sun 04/02/06 02:31 pm
GW# 001-001 Sec: 57
Day Change: 12:00am
Home Button
Pressing the Home button will revert to the default display. When editing irrigation programs, Station or Gateway
settings, pressing the Home buton will save any setting modications and return the user to the Home display.
Home display examples:
Sun 04/02/06 02:31 pm
GW# 001-001 Sec: 57
Next start: 03:00am
Sun 04/02/06 02:31 pm
GW# 001-001 Sec: 57
Running 02 programs
P01 Sta01 00:09:46
P05 Sta25 00:19:51
e Day Change line will display the next program start time (Next Start: HH:MM) if the current day is an active watering
day. If the gateway is running a program, the Day Change line will display
Running XX programs to indicate the
number of active programs.
Currently, the Gateway only displays the next automatic start for gateway A only. Gateway B’s next automatic start is not
displayed.
(typical Home display
with no active scheduled program)
(Home display with two active
scheduled programs)