Manualshelf

Installation Guide

ManualsBrandsUnbranded ManualsFlooring122 in. x 59 in. 120-Volt Radiant Floor Heating Film Kit for Floating Floors (50 sq. ft.)
12345678910
5. Make a room for wires
Because of the leveling the floor is going to be different where the wires and film’s
connecting parts, using a knife, carve out where the wires and connecting part is going
to be from the underlay, place the wires afterwards, and then finish off with the tape.
6. Place the Sensor
Do not damage the sensor in this process. If the sensor is damaged, it will
cause the thermometer to malfunction.