Instructions / Assembly

If your pool vertical does not have holes, simply use the top or bottom

cover as a template and drill through the vertical using a 9/64" diameter

drill bit, being careful not to damage the pool wall.

Place the bottom cover onto the bottom

of the vertical and align the holes on the

side of the wrap with the holes

on the bottom

of the vertical.

Secure the

bottom cover

using the

#12 x 1/2”

screws

provided.

#12X1/2”

SCREW

1 ON EACH

SIDE

WRAP AROUND

BOTTOM COVER

7" XL TWO-PIECE WRAP AROUND

TOP & BOTTOM COVERS

7” XL WRAP

AROUND

TOP COVER

2 - Slide the outside cover into position and align

the hole in the cover with the cage nut attached

to the top plate.

Secure using the 1/4”-20 x 3/4” screw provided.

OUTSIDE

COVER

LOGO

1/4”-20 X 3/4”

STAINLESS

STEEL

SCREW

1 - Insert the logo into the cover.