Instructions / Assembly

LEVELING THE GROUND
2
The top of the pool must be no
less than 3' from the ground.
And the ground must remain
level for a distance of 4' away
from the pool. Refer to the
drawing above.
DO NOT FILL IN DIG AWAY HERE
WARNING
LEVELING THE GROUND
THIS IS THE MOST IMPORTANT PART OF YOUR
PREPARATION OF THE POOL SITE. YOU MUST
GIVE CAREFUL ATTENTION TO THIS PHASE.
REMEMBER — YOUR POOL MUST BE
INSTALLED ON SOLID LEVEL SURFACE.
9
3 ft.
4 ft.
1 - Using the “CLEARANCE SIZE” chart on page 8, determine the clearance
size for your pool.
2 - With the use of the leveling device shown and a shovel start leveling the
ground, removing all grass and sharp objects such as sticks and stones.
3 - Level area to the lowest spot within the clearance radius.
DO NOT FILL IN LOW SPOTS.
4 -
Make sure the outer part of the circle is absolutely leveled, as this is
where the bottom track and pool wall will rest.
Clearance radius = ½ pool width + 6"
CARPENTER’S LEVEL
CLEARANCE RADIUS
CLEARANCE RADIUS
Clearance radius = ½ pool width + 6”
LEVEL AREA
CENTER STAKE
NAIL
2”x 4”