Instructions / Assembly

PREPARING THE GROUND
1
1 - Your pool must be installed on a solid level surface. After the pool
location is selected drive the two end stakes "A" into the ground and
mark the center line using string.
2 - Using the proper chart below (for your pool size) measure in along the
center line from the end of the pool and drive your center stakes "B" into
the ground.
3 - Use a length of string tied to the center of each stake “B” and mark the
area using a can of spray paint or flour. Connect each radius area to
make a complete oval layout of your pool.
D
D
D
D
3 FT.
3 FT.
ACTUAL POOL DIMENSIONS CLEARANCE SIZE
POOL
SIZE
DISTANCE:
A TO A
Pool
Length
DISTANCE:
A TO B
also
Radius X
DISTANCE:
B TO B
DISTANCE:
OFFSET
DISTANCE:
A TO C
DISTANCE:
C TO C
Length
DISTANCE:
C TO C
(across pool)
Width
X
Clearance
Radius
V
Clearance
Length
W
Z
Clearance
Width
DISTANCE:
D to D
18 x 12 18' 6' 6’ 12” 11' 4¾" 4' 18' 6' 6 " 19' 13' 19' 6'
20 x 12 20' 6' 8' 24” 12' ½" 4' 18' 6' 6 " 21' 13' 19' 6'
24 x 12 24' 6' 12’ 24” 12' ½" 8' 18' 6' 6 " 25' 13' 19' 10'
24 x 15 24' 7' 6" 9’ 6” 13' 2½" 8' 21' 8' 25' 16' 22' 10'
30 x 15 30' 7' 6" 15’ 18” 13' 10" 12' 21' 8' 31' 16' 22' 14'
33 x 18 33' 9' 15’ 18” 15' 11¼” 12' 24' 9' 6
" 34' 19 ' 25' 14'
39 x 18 39' 9' 21’ 6” 15' 3¾” 20' 24' 9' 6
" 40' 19 ' 25' 22'
45 x 18 45' 9' 27’ 18” 15’ 11¼” 24' 24' 9' 6 " 46' 19 ' 25' 26'
8