Instructions / Assembly

28
8" 9” AND 10” TWO-PIECE WRAP AROUND
TOP & BOTTOM COVERS
INSIDE
COVER
10” WRAP
AROUND
TOP COVER
8” WRAP
AROUND
TOP COVER
1 - Slide the inside cover (the cover which will
be closest to the inside of the pool) into
position and align the hole in the cover with
the cage nut attached to the top plate.
1
1/4”-20 X 3/4”
STAINLESS STEEL SCREW
2 - Secure using the 1/4”-20 x 3/4” screw
provided.
3 - Slide the outside cover onto the inside
cover. Make sure the inside cover is in
the slot of the outside cover.
2
3
4 - Align the holes on the
side of the bottom wrap
with the holes on the top
of the vertical.
Secure the cover using the
#12 x 1/2” screws provided.
The two (2) edges of the covers
should be parallel. Before
tightening the screws, press
the two covers firmly together.
#12X1/2” SCREW
1 ON EACH SIDE
4