Instructions / Assembly

ManualsBrandsUnbranded ManualsAbove Ground PoolsGalveston 30 ft. x 15 ft. x 52 in. Oval Above Ground Pool Kit

Attention: If your pool has the 2 piece resin

vertical, insert the flat piece into the vertical

before installation, as shown.

No. 12 x 1/2”

Sheet Metal Screw

If fencing or decking

is to be installed, refer

to the deck and fence

instructions before

installing verticals.

The holes indented in

the face of the verticals

must be on top.

If your pool is equipped

with feature tape, it is

best to apply it to the

verticals at this time.

VERTICAL BUTTRESS

VERTICALS

14

23

INSTALLATION OF

VERTICALS USING

THE "SNAP IN"

RESIN BOTTOM PLATE

"Snap In"

Resin Plate

1

Press down firmly

until the tabs in the

plate snap into the

holes in the vertical

and lock in place.

TO DISASSEMBLE

To remove the

vertical from the

plate simply use

a flat head screw driver

and pry the vertical in

and up from the plate

2