Instructions / Assembly

16
4 - Place the Internal
Buttress Support in
between the tabs of
the Buttress Bottom
Plate (Fig. 1 & 2).
5 - Slide the Buttress
Post over the Internal
Buttress Support and
outside of the tabs in
the Buttress Bottom
Plate (Fig. 3 & 4).
6 - Align the holes in
the Buttress Post,
Buttress Bottom
Plate and Internal
Buttress Support
and secure
using the
3” Hex Head
Bolt and Nut.
7 - Assemble the Buttress Brace Brackets
to the Buttress Post and Internal Buttress Support as shown.
8 - Repeat this process with all the buttresses.
9 - Assemble the Buttress Braces to the Bottom Strap Assemblies and
Buttress Posts as illustrated below using all necessary hardware.
Tighten securely.
If fencing or decking is to be installed, refer to the deck and fence
instructions before assembly.
Fig. 1
Fig. 2
Fig. 4
Fig. 3