Instructions / Assembly

ASSEMBLE BUTTRESS
7
1 - Refer to the graphic above.
2 - There may be two types
of Internal Buttress Supports.
The heavier one is labeled
“Outside Buttress”.
These are to be used
on the first and last
buttress
assembly
on both sides.
3 - The lighter Internal
Buttress Support is
used on the middle
buttress assemblies.
Heavy Supports
for outside bottom
strap assembly
Heavy Supports
for outside bottom
strap assembly
Heavy Supports
for outside bottom
strap assembly
Heavy Supports
for outside bottom
strap assembly
Light Supports for the inside
bottom strap assembly
Light Supports for the inside
bottom strap assembly
BUTTRESS
TOP PLATE
#12 x 1/2”
SHEET METAL
SCREWS
#12 x 1/2”
SHEET METAL
SCREWS
5/16”-18 x 1/2”
HEX HEAD
BOLTS
OR 3/4”
5/16”-18 x 3”
HEX HEAD BOLT
5/16”-18
HEX NUT
5/16”-18
HEX NUTS
BUTTRESS
BRACE BRACKET
STRAP
BUTTRESS
BRACE
BRACKET
BUTTRESS
POST
BUTTRESS
BRACE
BUTTRESS
BOTTOM PLATE
1/4”-20 x 2 3/4”
TRUSS HEAD
SCREWS
1/4”-20 x 2 3/4”
TRUSS HEAD
SCREWS
1/4”-20
HEX NUTS
1/4”-20
HEX NUTS
5/16” - 18 x 1/2”
HEX HEAD
BOLT
5/16” - 18 x 3”
HEX HEAD
BOLT
1/4” - 20 X 2 3/4”
TRUSS HEAD
SCREW
#12 X 1/2”
SHEET METAL
SCREW
5/16” - 18
HEX NUT
1/4” - 20
HEX NUT
Pre-assemble a Cage Nut into the
Top Plates (Note: Cage nuts not
needed on all pools).
Refer to Step #14 for instructions.
15