Instructions / Assembly

1 - Unpack and assemble the bottom straps with the buttress bottom plates
and brackets as shown using all necessary hardware and tighten securely.
The buttress bottom plates are packed in the Buttress Box*.
2 - Using the chart below determine the quantity of strap assemblies for your
pool.
3 - The screws joining the straps must be inserted from the top to prevent the
screw putting a hole in the liner once the pool is filled with water.
18' x 12' . . . . . . . . . . . . . . . . . 2
24' x 12' . . . . . . . . . . . . . . . . . 3
24' x 15' . . . . . . . . . . . . . . . . . 3
30' x 15' & 33' x 18'. . . . . . . 4
39' x 18' . . . . . . . . . . . . . . . . . 6
45' x 18' . . . . . . . . . . . . . . . . . 7
STRAP ASSEMBLY FOR OVAL POOLS
SIZES
18’ x 12’
24’ x 12’
Buttress
Bottom Plate
5/16” - 18 x 1/2”
Hex Head Screws
5/16” - 18 Hex Nuts
Buttress
Brace Bracket
5/16”
Washers
Straps
SIZES
24’ x 15’
30’ x 15’
Buttress
Bottom Plate
5/16” - 18 x 1/2”
Hex Head Screws
5/16” - 18
Hex Nuts
Buttress
Brace Bracket
5/16” Washers
Straps
SIZES
33’ x 18’
39’ x 18’
45’ x 18’
Buttress
Bottom Plate
5/16” - 18 x 1/2”
Hex Head Screws
5/16” - 18
Hex Nuts
Buttress
Brace Bracket
5/16” Washers
Straps
5/16” - 18 x 1/2”
HEX HEAD BOLT
5/16” WASHER 5/16” - 18
HEX NUT
ASSEMBLING THE BOTTOM STRAPS
3
10
*Buttress Bottom Plates are
packed inside the Buttress Posts
in the Buttress Box.
(Not in Carton 3)