Instructions / Assembly

13
EARTH
MOUND
8”
8”
OPTIONAL
WALL
GUARD
12”
12”
DANGER
DO NOT USE ANY MATERIAL THAT WILL COMPRESS
UNDER PRESSURE FOR THE EARTH MOUND.
SEE INSTRUCTIONS ABOVE.
1 - Build earth mound on top of wall guard using
screened damp earth or pre-washed sand.
2 - Shape and compact earth mound to
run 8" up from ground and 8" away
from the wall.
Do not use any material that will compress
under pressure for the earth mound.
The earth mound is an important part
of the pool installation. It prevents the
wall from lifting up and the liner from
sneaking underneath the pool wall.
3 - Spread the remaining sand equally across
the bottom of the pool. This will give you
a 2“ to 3” sand base.
Manufacturer
cannot assume
responsibility of the
performance of this
product if the earth
mound is omitted or
not properly installed.
THRU-THE-WALL SKIMMER
8
1
IMPORTANT!! BEFORE CONTINUING WITH THIS STEP
YOU MUST KNOW WHICH TYPE OF THROUGH THE WALL
SKIMMER YOU WILL BE USING WITH YOUR POOL
Your pool wall has cutouts to accomodate both STANDARD SIZE
SKIMMERS (Fig. 2) and DELUXE WIDE MOUTH SKIMMERS (Fig. 1).
If you have a WIDE MOUTH SKIMMER, you will be required to remove the
entire cutout as shown in figure 1. To remove the section, you can use either
tin snips or a hammer and knife as shown in figure 3.
LARGE WIDE MOUTH
SKIMMER
CUT OUT ENTIRE
AREA