Instructions / Assembly

24
WRAP AROUND BOTTOM COVER
1 - Insert the logo into the bottom cover.
2 - Place the bottom cover onto the bottom of the vertical
and align the holes on the side of the wrap with
the holes on the bottom of the vertical.
3 - Secure the bottom cover using the #12 x 1/2” screws provided.
#12X1/2”
SCREW
1 ON EACH
SIDE
1
2
3
WARNING LABELS
15
WARNING
Four (4) danger labels have been provided for your safety.
Apply these labels to the pool where they are easily visible
to all persons using the pool.
To do this, simply peel the backing off the label to expose
the self stick back and firmly press to a conspicuous and
plainly visible surface on the pool.
DO NOT REMOVE THE DANGER OR WARNING
LABELS UNDER ANY CIRCUMSTANCES
POOL USER WARNING LABELS
16
The manufacturer has provided warning signs to prevent diving and/or
jumping into your pool. Alert all pool users to these signs.
Should you need additional labels for any reason, the manufacturer will
supply these labels to you at your request. Simply order the desired label
by part number either from your local dealer or direct from the manufacturer.
#490090
#490091
#490021