User Manual

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [e-mail]
Page 19
Connect FY-41AP to your PC, from ―my computer‖ –―device manager‖ –―Port‖ to find
COM port , select corresponding COM port. Baud rate has to be―19200‖, click ―connect‖
button. After FY-41AP establish connection with the GCS software successfully .Select
the ―Menu-> Autopilot Configuration Wizard‖ ,you can finish the setting in the configuration
Wizard .The last ,you can click the button ― ‖ to save the setting into the
FY-41AP controller.
Step One: Installation direction setting
First you should set the correct mounting direction according to the FY-41AP
mounting direction on the plane(The default setting is Arrow forward).After choose the
correct mounting direction, pitch and roll inclined the plane through the attitude Chart to
check whether the posture and aircraft state is identical.
Method one: Setting FY-41AP via remote control and OSD overlay menu
Setting via the "Install Setting" option in the OSD menu.