Use and Care Manual
Page 6 of 7
Maintenance
Only use a damp clean cloth to clean the unit. Never use chemical cleaning
products, scrubbing powder, steel wool, or hard sponges to clean the unit
as it may damage to the unit;
IMPORTANT: The warranty does not cover risks of rusting. Always keep the
unit away from continuous rain and/or excessive humidity; Keep in mind to
always properly dry the unit after cleaning it with water;
PERIODIC SERVICE REQUIREMENT: VERIFY OPERATION OF MANUAL SHUTOFF DEVICE.
Installation
1. Burner Installation
a. Place the burner top plates(2) on top of the burner(4).
b. Place the burner(4) into the overflow container(3).
c. Carefully place the overflow(3) into the designated slot(c).
Installation Schematics
INSERT XL
FREE STANDING







