Manualshelf

User Manual

ManualsBrandsUnbranded ManualsAircraftFRF3 Evo Brushed Flight Controller with Integrated FrSky Compatible Receiver
123
2. The default configuration was set AUX1(CH5) to ARM/DISARM the motor before shipping,
you can also customize it. The default receiver channel map is TAER1234, please ensure your
transmitter is matched with it, otherwise it can't be armed.
3. Toggle the Switch SWA and the blue LED on the flight controller will get be solid, this
indicate the motor was armed ,enjoy yourself now and be careful !
4. If you flashed the firmware, don’t forget to configure the receiver : First enable Serial RX for
UART2,then set Receiver mode to RX_SERIAL and Choose SBUS output .