Manualshelf

User Manual

ManualsBrandsUnbranded ManualsAircraftFRF3 Evo Brushed Flight Controller with Integrated FrSky Compatible Receiver
123
2. Jumped the two bind pins on the board and then connect the battery, the Blue led is solid.
3. Go to the Receiver [Bind] option, and ENT to Bind with the receiver, The transmitter beeps.
4. The Blue LED on the receiver will turning off, this indicates that the bind process was
successful. Reconnect the battery to the flight controller, and the Blue LED on the receiver is
solid again.
ARM/DISARM the motor
1. Turn on the transmitter and move to the MIXER interface, Set “SA” or “SB” switch etc. for
Ch5 to ARM/DISARM the motor.