Use and Care Manual

and is dark. When the heater is not in low-power status ( is dark), press <LOW> button will
switch it to low-power status; when it's in low-power status ( is brighten up), press <LOW>
button will turn it off. Similarly, a <HIGH> button press will switch the heater to high-power status
when is dark, and turn it off when is brighten up.
Note, before the heater emits heat or after it stop producing heat, the hot air outlet may output air
for 10 seconds. This is designed for protect circuit, and it's not spoiled.
4. Power off the heater when you leave it for a long time.
5. The two alkaline battery must be removed from the appliance before it is scrapped.
6. The alkaline battery is to be disposed of safely.
7. Roll up the power cord in the supports when the heater is not in use.If your select to store your
heater fully assembled, be sure to cover it, to protect it from accumulating dust.
8 Temperature Limiting control will automatically disconnect from power when reach a certain
temperature，then unplug the power，When the temperature falls ，the thermostat will be
restored ，connect the plug to power，heater will work.