User Manual
KDS FLYMENTOR PPC MANUAL
WWW.KDSMODEL.COM
Main Menu
There are nine items in main menu , each item contains a set of settings for flymentor. You
can move the cursor to the item you want by press UP and DOWN, press OK you can
enter the item and modify the settings. See table 1 for details of them.
You can also press the LOAD/SAVE button here, then the load/save menu will shown, see
chapter load/save for details.
Picture 3 - Main menu
Item No Name Details
* To Factory Reset the KDS flymentor to factory settings
1 Mounting Settings about parameters of mounting
2 Servo Rev Settings about reverse of each servo
3 Servo Neu Settings about neutral of each servo
4 Stick Rev Settings about reverse of sticks
5 Swash Trv Settings about swash travel for elevator, aileron and col. pitch
6 Tail Gyro Settings about parameters of internal gyro
7 KDS flymentor Settings about KDS flymentor
8 Expert Some advance settings for expert user
Table 1 - Items
Modify Parameters
When press OK in main menu, you will enter the settings for some item, for example, the
sixth item, 'Tail Gyro' settings, like picture 4.
Picture 4 - Select parameter
Cursor
Item no.
Select no.
Total items
Cursor
Category
Parameter
name
Parameter value