User Manual

10
2.2 Adjustment and Saving
Normally, you should read parameters from Flymentor 3D before adjusting, then change and
save it. After Flymentor 3D was connected, click 'Read' button, see diagram2.2.1.
‘Read' button
Diagram 2.2.1 Read parameters
After reading, you will see configure page on the right side of the software, like diagram2.2.2.
You can use mouse to drag them for fast adjusting, or use keyboard (left or right) for
precise adjusting.
Diagram2.2.2 Sample configure page
Switch
Parameter bar
KDS Flymentor 3D User Manual
07-17-平衡仪说明书(英文).pdf 13 2009-8-3 15:06:46