User Manual

9
Diagram2.1.3 Adapter not found
After the adapter is found, the software will try to communicate with Flymentor 3D. If the
Flymentor 3D is not power on, you will see 'No device' on status bar. Otherwise it will show
'Connected' after few seconds, shown as diagram 2.1.4.
Diagram2.1.4 Flymentor 3D connected
KDS Flymentor 3D User Manual
07-17-平衡仪说明书(英文).pdf 12 2009-8-3 15:06:46