User Manual

7
2. Connect to computer
2.1 Installing driver
Configuring Flymentor 3D must use a computer, you should take a computer with USB port
and mouse, and it must has Microsoft Windows OS(Windows XP/Vista/Windows2000) .
Plug into
Flymentor 3D
KDS USB adapter
Plug into USB port
Driver of USB adapter
Configure software
Diagram2.1.1 Connect Flymentor 3D with computer
First, please plug the USB adapter into Flymentor 3D, then plug USB, refer to
diagram2.1.1. When the computer notifies you find new hardware, and needs driver, please
choose the KDSLINK.INF. Then run HeliBal.exe, you will see the main interface of the configure
software like diagram2.1.2.
KDS Flymentor 3D User Manual
07-17-平衡仪说明书(英文).pdf 10 2009-8-3 15:06:45