User Manual

30
'Write' button
'Reset' button
Modify flag
Diagram 6.1 Reset to factory settings
7. FAQ
When this happens, it is recommended that you use this function to restore Flymentor 3D to
factory settings. Then do some changes on the base of factory settings.
Click 'Reset' button, settings on screen will restore to factory default value, then click 'Write'
button, settings will be saved into Flymentor 3D after progress bar shows finished.
*Attention: if ' Write' function did not be executed, the factory setting would not be save
into Flymentor 3D.
Q: Serv no action
A: Refer to section 1.4, make sure the Flymentor 3D is working properly.
os have
KDS Flymentor 3D User Manual
07-17-平衡仪说明书(英文).pdf 33 2009-8-3 15:06:48