User Manual

6
Exampled by Flight Mode 2 settings, introduce PWM value setting method of ight mode switch.
Number PWM Range PWM Median
0~1230
Flight Mode 1
Flight Mode 2
Flight Mode 3
Flight Mode 4
Flight Mode 5
Flight Mode 6
1230~1360
1361~1490
1491~1620
1621~1749
1295
1425
1750+
1555
1685
>1850
<1130
Press SET button more than 3 seconds,
and the green indicator blinks slowly. At
present, press SIM button can turn down
PWM value.
Press SET button again, and the green
indicator will blink quickly. At present,
press SIM button can turn up PWN value.
Long press SET button till the
green indicator solid when PWM value is
near the middle value of its mode and
settings can be saved.
Press SIM button, and if the green indic
ation line still stays at Flight Mode 1, you should set the
parameters.Specific operations are following.
2. Press the Mode Switch Button on the switcher, and check if every mode is corresponded to six ight
modes on the Mission Planner by Current mode and Current PWM in the top of the GUI. And PWN value
should be near the middle value of every mode.
·
·
·