User Manual

Prole
Flight Mode Switcher is designed for open source autopilots such as APM, PX4 and PIX
etc. It can
switch the flight mode accurately and quickly,replaces the troublesome two-stage or three-stage
switchers. Users can set parameters for the ight mode switcher on the actual situation and choose the
most suitable operational plan.
Flight Mode Switcher has the features of small size, low-power, stable performance and easiness to
handle. It is appropriate for every RC System of each brand and type.It can also bring users better flight
experience.
3
[1] Flight Mode Switch Button
Connect to the RC System.
Set the parameter of ight mode.
Show the state of mode switching and
parameter setting.
Switch the six ight modes.
[2] Mode Indicator
[3]ModeSetButton
[4] Signal Port
[3]
[1] [2]
[4]
In the Box
Flight Mode Switcher ×1
Connector Cable ×1
Connect to your RC System by connector. After
preinstalling six flight modes, you can switch the
mode by the six buttons when ying.
Connect the ight mode switcher and RC System.