Flight Mode Switcher User Manual V1.0 2015.
Content Pro ile 3 In the Box 3 Installation 4 Install Flight Mode Switcher 4 Settings 5 Specifications 7 2
Profile Flight Mode Switcher is designed for open source autopilots such as APM, PX4 and PIX,etc. It can switch the flight mode accurately and quickly,replaces the troublesome two-stage or three-stage switchers. Users can set parameters for the flight mode switcher on the actual situation and choose the most suitable operational plan. Flight Mode Switcher has the features of small size, low-power, stable performance and easiness to handle. It is appropriate for every RC System of each brand and type.
Installation Install Flight Mode Switcher · Flight Mode Switcher should be connected to the RC System before using. And improper connection can result in abnormal work even causing damage to the switcher. · The RC System should have spare channel ratio (usually connected with potentiometer), and provided with power of 5V/3.3V. · Users can refer to this instruction of cable connection to install the Flight Mode Switcher, exampled by the V1 knob channel in WFLY7 RC System. 1.
3. Use double-sided tapes or screws to fix the flight mode switcher to the proper position on RC System. Settings 1. After finishing the switcher cable connection, turn on RC System; connect autopilot by Radio or USB cable to the Mission Planner. Choose Flight Mode in the CONFIG/TUNING. Set flight modes according to the figure.
2. Press the Mode Switch Button on the switcher, and check if every mode is corresponded to six flight modes on the Mission Planner by Current mode and Current PWM in the top of the GUI. And PWN value should be near the middle value of every mode.
· Long press SET button more than 3 seconds and press it again after seeing the green indicator blink slowly. · At present, current PWN value can be turnd up to near "1295" value by pressing SIM button and green indication line will automatically switch to Flight Mode 2. · Long press SET button can save current settings. Specifications Type Flight Mode Switcher Supported Devices Futaba 6EX AP, WFLY6A/6C/7, Saitek X52 Pro, Frsky T6 etc.
The content is subject to change. Download the latest version of manual from the official website.