Datasheet

Page 3 of 8 QR-QE-20/2003.08.01
1
Figure of the
slid bars
operation
滑柄動作形式
Slides on the 2D flat
平面移動的形式
/
2
The stopper
strength of
the slid bars
滑柄止動強度
More than 3.0Kgf
3 seconds min
大於 3.0Kgf，至少 3 秒鐘
Apply side force on the slid bars
perpendicular to the slid bars’s
axial direction.
垂直於滑柄的力作用於滑柄上.
3
Rotational
Stopper
Strength of
the slid bars
滑柄旋轉止動
強度
150gf.cm Min
There should be no visual damage when
minimum 150gf.cm of torque are
applied. The slid bars to be operated
mechanically
當其承受小於 150gf.cm 之扭力時，無明顯
破壞及損傷,滑柄機械操作順暢。
4
The wobble
angle of the
slid bars
滑柄虛位角度
5.5 ﾟ single Max
The maximal single wobble angle when
the slid bars rotation
滑柄旋轉時的最大單邊虛位擺動角度。
5
Pull strength
of slid bars
滑柄 拉拔強度
More than 3.0 Kgf
3 seconds min
大於 3.0Kgf，至少 3 秒鐘
Apply specified pull force on the slid
bars upward.
作用於滑柄上，沿滑柄方向向上.
6
Push
Strength of
slid bars
滑柄推壓強度
More than 3.0 Kgf
3 seconds min
大於 3.0Kgf，至少 3 秒鐘
Apply specified push force on the slid
bars downward.
作用於滑柄上，沿滑柄方向向下.
7
Operation
travel of the
slide bars
滑柄使用有效
行程
2 mm
The travel of the slide bars pushed to
any direction on the 2D flat.
滑柄在 2D 平面在推向任何方向的行程
8
Operating
force of
slide bars
滑柄作用力
120±50gf
The push force is to made the slide bars
to be slided by A direction.
沿 A 方向使滑柄滑動的推力.
A