Datasheet

Page 3 of 8 QR-QE-20/2003.08.01
Push the slide bars to any direction
推動滑柄向任何方向
3
Rotational
Stopper
Strength of
the slid bars
滑柄旋轉止動
強度
/ /
4
The wobble
angle of the
slid bars
滑柄虛位角度
/ /
5
Pull strength
of slid bars
滑柄 拉拔強度
More than 3.0 Kgf
3 seconds min
大於 3.0Kgf，至少 3 秒鐘
Apply specified pull force on the slid
bars upward.
作用於滑柄上，沿滑柄方向向上.
6
Push
Strength of
slid bars
滑柄推壓強度
More than 3.0 Kgf
3 seconds min
大於 3.0Kgf，至少 3 秒鐘
Apply specified push force on the slid
bars downward.
作用於滑柄上，沿滑柄方向向下.
7
Operation
travel of the
slide bars
滑柄使用有效
行程
2 mm
The travel of the slide bars pushed to
any direction on the 2D flat.
滑柄在 2D 平面在推向任何方向的行程
8
Operating
force of
slide bars
滑柄作用力
120±50gf
The push force is to made the slide bars
to be slided by A direction.
沿 A 方向使滑柄滑動的推力.
9
Accuracy of
reset
position of
slide bars
滑柄復歸精度
±0.2 mm
Measure the distance between the
center of the slide bars and the center
after the slide bars pushed to the any
direction on the 2D flat and resets.
測量滑柄的中心和滑柄在 2D 平面推向任
何方向後復歸的中心的距離.
A