Data Sheet
Table Of Contents
- 1 FH3D02 Overview
- 2 Characteristics
- 3 Package and Circuit Connection
- 4 SPI Communication
- 5 List of Registers
- 5.1 Measurement Register Contents
- 5.1.1 0x000B (read/write) – Measurement Control
- 5.1.2 0x000E (read/write) – Measurement Start
- 5.1.3 0x0107 (read only) – Status Register
- 5.1.4 0x0110 (read only) – Temperature Sensor
- 5.1.5 0x0111 (read only) – Bi0 Magnetic Field
- 5.1.6 0x0112 (read only) – Bi1 Magnetic Field
- 5.1.7 0x0113 (read only) – Bj0 Magnetic Field
- 5.1.8 0x0114 (read only) – Bj1 Magnetic Field
- 5.1.9 0x0120 (read only) – Magnetic Field Magnitude
- 5.1.10 0x0121 (read only) – Magnetic Field Angle
- 5.1.11 0x0122 (read only) – Linearized Angle / Bz1 Field (Special Function Mode)
- 5.1.12 0x0124 (read only) – Bz0 Magnetic Field (Special Function Mode)
- 5.2 Result Register Overview
- 5.1 Measurement Register Contents
- 6 Measurement Modes
- 6.1 Single Magnetic Probe
- 6.2 Dual Magnetic Probe
- 6.3 Linear Position or Off-Axis Angle Sensor (Absolute Field Values, Magnet On-Top)
- 6.4 Linear Position or Off-Axis Angle Sensor (Gradient Field Values, Magnet On-Top)
- 6.5 Linear Position or Off-Axis Angle Sensor (Absolute Field Values, Magnet At-The-Side)
- 6.6 Linear Position or Off-Axis Angle Sensor (Gradient Field Values, Magnet At-The-Side)
- 7 Additional Features
- 8 LZE GmbH
Seite 40 von 44
Copyright © 2021, LZE GmbH
www.lze-innovation.de
Additional Features
Example data of real magnet in gradient mode. The standard CORDIC angle “Gradient” jumps between +/-180° if the Bj component
crosses 0. “MgnRngExt” shows a valid angle without ambiguity by offering a range of +/-288°.
Please note: Bi and Bj are not directly accessible by SPI.
-32768
-24576
-16384
-8192
0
8192
16384
24576
32768
-10 -05 00 05 10
Value [LSB]
Position [mm]
Register values vs Position (gradient mode)
0x111 (Bi0) 0x112 (Bi1) 0x113 (Bj0)
0x114 (Bj1) 0x121 Gradient 0x121 MgnRngExt