E-commerce Division - Enitial Lab FGI-18707C24 (Not Included) Page 1 of 23 18-09-27
Page 2 of 23
Page 3 of 23
Page 4 of 23
Page 5 of 23
BUFFET MODEL #FGI-18707C24 Page 6 of 23
Get Ready Please group boards as below Page 7 of 23
Insert a dab of glue (#10) to the dowel holes of panels before inserting dowels (#3). Refer to page 5 on how to secure cam locks (#2) onto cam bolts (#1).
Page 09 of 23
Page 10 of 23
Thin lined gap is at the bottom of panel (#J).
Thin lined gap is at the bottom of panel (#G).
Finished side of panel (#L) is here.
Slide back panel (#R) through the thin lined gap of the unit.
Page 15 of 23
Rotate so the unit is upside down.
Page 17 of 23
Page 18 of 23
Cover cam locks (#2) with stickers (#11).
Fully extend drawer rails, then align drawer holes to the smallest holes of the drawer rails. Secure drawer to drawers rails by using bolts (#8).
Attach shelf pins (#7) to the desired height of the shelf (#H). This screw adjusts length of hinge/door. This screw adjusts depth of hinge/door.
Insert fixative plates (#9) all around the grooves of the back panels, then secure by using screws (#9).
Page 23 of 23
