E-commerce Division - Enitial Lab FGI-18705C24 (Not Included) Page 1 of 20 18-08-20
Page 2 of 20
Page 3 of 20
Page 4 of 20
Page 5 of 20
BUFFET MODEL #FGI-18705C24 Page 6 of 20
Get Ready Please group boards as below Page 7 of 20
Apply a small dab of glue into dowel holes of panels before inserting dowels (#3). Refer to page 5 on how to secure cam locks (#2) onto cam bolts (#1).
Page 09 of 20
Secure leg attachment (#11) to panel (#D) by using screws (#5). Make sure the lowest point of the leg attachments (#11) are at facing the corners of panel (#D).
Page 11 of 20
Finished Apply stickers (#20) to cover these cam locks (#2).
Page 13 of 20
r ge n Lo There is a hole on each of panels (#P). This will help determine the orientation of panels (#P).
Page 15 of 20
Extend drawer rails, then align the smallest hole of the drawer rails to the holes of the side drawer panels. Secure by using bolts (#8).
Attach shelf pins (#7) to the desired height of the shelf (#G).
Insert one end of the door panel (#Q) first before inserting the other end.
Insert fixative plates (#9) all around the grooves of back panels (#P). Secure by using screws (#9).
Page 20 of 20
