User Manual
FIRMWARE FLASH -F3 EVO_Brush
The following tutorial covers flashing Cleanflight Firmware onto the F3
EVO_Brush Flight Controller. Betaflight is the same steps like Cleanflight.
Installing the ST drivers:
(For Windows Only)
Download and install the DfuSe demo package.
Open an explorer window and browse to (assuming you’ve installed to the
default path) C:\Program Files (x86)\STMicroelectronics\Software\DfuSe
v3.0.5\Bin\Driver
Browse two folders deeper to the folder relative to your Operating System
version, and x86-32bit or x64-64bit variant.
Click the dpinst_x##.exe to install the driver.
Installing Cleanflight Configurator:
(For Windows Only)
You must use Cleanflight Configurator v 1.0.0 or newer.
The following assumes you also have the Chrome Browser
installed.
Get the latest Cleanflight Configurator (+ Add to Chrome)