Installation Guide

STEP 6
Attach the bare copper ground wire
from the power supply to the ground
wire in the junction box with a wire
nut.
Note: Steps 7-9 are for REMOTE
MOUNTED THERMOSTATS ONL
Y
.
If you are using the unit mounted
thermostat, skip to step 10.
STEP 7
Attach the white wire from the power
supply to one of the wires that you
separated in step 4. Connect these
together with a wire nut.
STEP 8
Attach the black wire from the power
supply to the other wire separated in
step 4 using a wire nut.